one more step4success (optimistnet.com)

What is Optimistnet ?

The World we live in is Full of negativity

Your best friends might put you down

Most people will tell you that you will never make it

You open the news and get exposed to so many negative messages

You walk in the streets see angry and sad faces.

All of these negative messages pass directly to your brain and shape your beliefs then in the end you start wondering why are you sad, pessimistic or even depressed.

The only way to prevent your mood from being ruined is to balance this negativity by getting exposed to some positivity as well. This is why we created www.optimistnet.com

The first social network that has nothing but motivating, positive and uplifting content, Join optimistnet today and get your daily dose of uplifting positive messages.

If you really want to become successful and want to achieve what you believe in, then you should follow those positive and optimist people who will help you. 

Bhagwant Singh (me) personally use this network to remain positive. Don't let negative, arrogant and narcissist people affect your dreams. Good luck.!:)

utu previous year question papers uttarakhand technical university b.tech 4th sem (2013-2014) sub: microprocessor and its applications

utu previous year question papers
uttarakhand technical university
b.tech 4th sem (2013-2014)
sub: microprocessor and its applications 

Q1: Attempt any four parts:

1. Give a short note on evolution of microprocessor.
2. Draw the basic block diagram of microprocessor and explain the function of each block in brief. 
3. Explain all types of semiconductor memories in brief.
4. Discuss the organization of semiconductor memory and advantages and disadvantages of SRAM over DRAM.
5. Explain the sequential and parallel types of memory with the help of suitable example.
6. Draw and explain the timing and control unit.

Q2 Attempt any four parts:

1. Draw the basic arhtiecture of 8085 microprocessor.
2. Explain the pin diagram of 8085 microprocessor.
3. Explain the various addressing modes of 8085 microprocessor.
4. Explain the following instruction of 8085 microprocessor.
   a) ADI data
   b) LXI B, 02H
   c) DCRC
   d) RLC
5. Write and assembly language program for te addition of two decimal numbers using 8085 microprocessor.
6. Draw the timing diagram of memory read cycle in 8085 microprocessor.

utu previous year question paper sub : POM (Principles of Management)

Uttrakhand Technical University
sem: 6th
utu previous year question paper
2013-2014
sub : POM (Principles of Management)

Q1: Attempt any two.

1. List any five major function performed by the management?
2. What is need of hierarchy theory of managment?
3. Compare and contrast the works the works of F.W.Taylor in the area of scientific management?

Q2: Attempt any two.

1. discuss various theories of management.
2. Difference between co-ordination and monitoring.
3. What do you mean Managerial decision making and MIS?

Q3: Attempt any two.

1. How can an employee interact with internal and external environment?
2. What guideline s would you suggest to ensure effective organization? Also explain the process of organizing?
3. What are the steps in controlling? Explain with suitable examples.

Q4: Attempt any two.

1. What are challenges of motivation in the new workplace?
2. What are the steps in organizational structure?

                                         ..........xxxxxx............

What are step4success?

What are step4success?

1. Goal Setting: - set your goal is the first step4success if you don’t have any goal find one.
2. Time management:- now write the goal on a diary and make a schedule for it.
3. Take action: - now stop thinking about it much and start taking actions….go take action just start it dude.
   (Learn missing skills, find new ideas, practice, and apply learned skills practically.)
4. Persistence: Most people just complete the above 2 steps but then they give up too soon. This is horrible mistake. Only persistence will lead you toward success.
5. Failure (optional):- if your plan or schedule fail just be flexible make a new one and start form the step one (goal setting) again. Remember break downs and rejections are a part of success ladder.
6. Finally:  you get what you want. Congratulations and enjoy this proud feeling.

Extra tip: obstacle will come on your way to put you down, just believe in yourself and follow these steps.

Q:- But why most people doesn't get what they want? 

Answer: they doesn't take action, or they give up too soon, they listen to those experts who put them down, they doesn't have any role model, they doesn't like to feel bad emotions of rejection or failure, they doesn't want get out of their comfort zone, make excuses, they blame their luck instead of finding the missing skills and try to start again, they have negative beliefs about success etc.

start now.! i am sure you can.

written by: Bhagwant Singh

APPLIED ELECTRONIC & INSTRUMENTATION

UTU PREVIOUS YEAR QUESTION PAPERS
SUB: APPLIED ELECTRONIC & INSTRUMENTATION
SEM-V (2013-14)

Attempt any Four parts:

1. Define the word transducer? Also classify them?
2. State the 5 static characteristics of Transducer?
3. Explain the working of LVDT in addition with c type Bourdon tube with proper diagram?
4. For what purposes Strain gauge is used ? Explain semiconductor types & gauges?
5. What do you understand by temperature compensation? how temperature compensation is done using Wheatstone bridge circuit using 2 active elements?

 Attempt any Two parts:

1. With the help of appropriate diagram explain the working of resistance temperature detector? Also state the difference between Thermistor & amp; Resistance temperature decoder?
2. Give the basic idea about elastic pressure Elements? How pressure measurement is done Bellows?
3. A Thermistor has a resistance of 10 kilo ohm at 25 degree Celsius. The resistance temperature coefficient is -0.05/ degree Celsius. A Wien’s Bridge Oscillator uses 2 identical Thermistors in the Frequency determining part of the bridge .The value of capacitance used in the Bridge is 500pf .Calculate the value of frequency of oscillations for .
   (a) 20 degree Celsius 
   (b) 25 degree Celsius
   (c) 30 degree Celsius

 Attempt any Two parts:

1. Define Vibration and Shock? Also describe the need and importance of Vibration measurement including the diff between Vibrometer and Accelerometer?
2. Describe the construction of a Seismic type vibration Transducer ? Derive the steady state o/p of the Transducer when a Sinusoidal i/p is applied to it ?
3. Describe Tachometer? What r Electromagnetic and Photoelectric type Tachometer?

Attempt any Two parts:

1. What do u understands by Telemetry System / Also explain Radio Telemetry.
2. What is SNR ? Why there is need to improve it ? And how improvement of SNR is done.
3. Difference between Grounding and Shielding with the help of proper diagram ?

Attempt any Two parts:

1. With the help of block diagram explain DC as well as AC electronic voltmeter?
2. What are current probes? Give the basic principal of operation of AC and DC current probes?
3. Explain ramp and dual slope integration type digital voltmeter?

_______________________

VLSI Technology (utu previous year question paper)

utu previous year question paper

sub:- VLSI Technology 

b.tech sem 5th

Uttarakhand Technical University

Q1:- Attempt any four parts:

1. Describe CZ process in detail with neat diagram. What is the pull Rate in CZ technique? How the Pull rate is controlled during the CZ crystal growth process?
2. A silicon ingot with 0.5 * 10^16 boron atoms/cm^3 is to be grown by CZ method. What should be the concentration of boron in the melt to obtain the required doping concentration? The segregation coefficient of the boron is 0.8
3. Describe the effect of orientation on oxidation? Prove that linear growth rate occur for short time oxidation.
4. Calculate the oxidation time required for the thermal oxidation of 100A thickness at 1000 degree C. NOTE: B= 5.2  105A 2/min. and B/A = 111A/min {A = angstrom }
5. Describe two most common methods used for measuring thermal oxide thickness.

Concept of Programming and OOPS (Utu previous year question paper)

Utu previous year question paper

sub:- Concept of Programming and OOPS

b.tech 2013-14 (sem-5)

uttarakhand technical university

time: 2hrs

max marks: 50

Q1:- Attempt any four of the following:

1. What is editor? Explain the main functions of vi editor.
2. What is looping mechanism? Differentiate between while and do-while loop with a suitable example.
3. Explain UNIX shell and its type in brief.
4. Explain recursive function. Write a C program to find the factorial of a given integer by using recursion.
5. What is array? Write a C program for addition of two arrays
6. Differentiate if and if-else statement by using a C program.

Q2:- Attempt any four of the following:

1. What do you understand by testing and debugging process? write a program in C to check the given number is even or odd.
2. What are the variable and keyword in C language? Explain with proper example.
3. Explain the phases of software development life cycle (SDLC) model. Draw a spiral model of a software development.
4. Describe the various processes involved in user interface design.
5. What is code review? Write an algorithm to check whether the given year is leap or not.
6. "C is known as structured programming language". Why? Justify the statement.